1570R - Power Supply Question

[VENKAT_S_P]

1570R is the successor product for 1200R.

1570R supports redundant power supply, the question I have is:

1) when using both power sources, how to verify which is the active one.

2) if one fails, how to verify which one failed?

#1570R Quantum Spark (SMB) #Power supply

[G_W_Albrecht · Accepted solution]

If you use both power sources, appliance will work even if one power supply fails - but the 1570R is not able to tell which one fails. You will have to check the DC terminal block with a meter to find out if it still has power and the PSU is defective.

[VENKAT_S_P]

Thats what I thought, Thanks for the reply @G_W_Albrecht 

[G_W_Albrecht]

I just repeated the datasheet - and there is no way in WebGUI to see which power supply fails. The firmware is the same for the other 15x0 / 1600 / 1800 appliances that do not have HA power sources, so it is an understandable behavior. Glad about a Kudo 😎

[VENKAT_S_P]

Understood. Thanks again for verifying this.

[G_W_Albrecht]

It makes me understand some details better when trying to answer question, and that could be very handy in my job as a CCSP 😎