1570R - Cluster Interface not present on one Cluster member

[Roadrunner88]

Hello,

we have a little Problem with Cluster Xl on two 1570R Firewalls.

As you can see in the picture, one of the two firewalls has a missing Cluster Interface (WAN Port)  for some reason.

Can anybody explain to me, how I can fix this issue?

Failover is not working, we are facing outages when we try a testing failover. So I Suppose, something went wrong by enabling the Cluster on each side and the problem is because of this missing cluster virtua Interface.

[G_W_Albrecht]

Why post this in

• CloudMates Products
• Application Security

?

[Roadrunner88]

how can I move it?

[Chris_Atkinson]

Done. Moved to Spark/SMB.

[G_W_Albrecht]

You did follow SMB HA Cluster configuration steps ? Standby only has FTW performed, all other configuration details are synced from the active node.

[Roadrunner88]

We just removed this second firewall from cluster and reattached it by readding the second firewall as a new device

after this this virtual WAN Cluster Interface was present.

After testing the Failover functions of the WAN interface, we lost connection of the devices and the WAN Virtual Cluster Interface of the second Firewall again disappeard.

Whats wrong?

Thanks

[Roadrunner88]

We also did configure the cluster via Wizard before

[G_W_Albrecht]

I would suggest to contact TAC !

[Chris_Atkinson]

The other option is to try R81.10.05 and see if the issue persists?

Is there anything odd / special about the WAN links in question?

[renzi]

👍