Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
nflnetwork29
Advisor
Jump to solution

split tunnel vpn traffic not working

when i check route print on my windows PC I can see the proper routing entry that should be sending traffic over the checkpoint vpn . However, when i run any traceroute it looks like the traffic is going out my internet connection. what am i missing?

 

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.172.253.1 10.172.253.63 35
10.54.0.0 255.255.128.0 172.16.10.2 172.16.10.1 1
10.172.253.0 255.255.255.0 On-link 10.172.253.63 291

 

C:\>tracert 10.54.152.200

Tracing route to 10.54.152.200 over a maximum of 30 hops

1 3 ms 2 ms 2 ms 10.172.253.1
2 1 ms <1 ms <1 ms ^C
C:\>

 

 

 

 

 

 

 

0 Kudos
1 Solution

Accepted Solutions
nflnetwork29
Advisor

subnetting mishap lol on the enc domain . 

View solution in original post

0 Kudos
8 Replies
the_rock
Legend
Legend

Make sure below options are enabled, as that will force all traffic via the CP firewall and NOT your ISP. If they are disabled, like in my case, that counts for split vpn tunnel.

Andy

Screenshot_1.png

Screenshot_2.png

0 Kudos
nflnetwork29
Advisor

i don't want all traffic to go thru the checkpoint only the networks defined in my encryption domain. 

0 Kudos
the_rock
Legend
Legend

Fair enough...can you ensure those options are disabled then?

Andy

0 Kudos
nflnetwork29
Advisor

still not working. something buggy going on. 

0 Kudos
nflnetwork29
Advisor

its working now. thanks, 

0 Kudos
the_rock
Legend
Legend

Anything changed or was it just PC you were testing from?

0 Kudos
nflnetwork29
Advisor

subnetting mishap lol on the enc domain . 

0 Kudos
the_rock
Legend
Legend

it happens 🙂

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events