VPN Client Multiple Interfaces

[Roy_Smith]

Hi 

I am investigating some issues our users are having with Remote Access VPN. In my investigation, I came across this post - https://community.checkpoint.com/t5/Remote-Access-VPN/Endpoint-VPN-users-facing-extreme-slowness/m-p...

When I look at our gateways to confirm if the option "Support connectivity enhancement for gateways with multiple external interfaces" is enabled or not, I do not see it. The option is not there. I do remember seeing it in the past but cannot remember what was set. 

Is this an option that has been removed in R81.10? Or has it moved somewhere else? Or is it not relevant now?

Any help on this is appreciated.

Many Thanks
Roy

[Juan_]

Hi There,

Yes, looks like it doesn't exist any more under R81.10 manager.

@PhoneBoy, Any insights on this?

Thanks

[PhoneBoy]

It's documented here: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut... 
However, I too am not finding it there in R81.10.
A TAC case might be in order. 

[Roy_Smith · Accepted solution]

I raised a call and got the following response:

"The "Support connectivity enhancement for gateways with multiple external interfaces" option is integrated into the newer versions - Since R81. 
Therefore, as this functionality is built-in since R81, this option is not appearing anymore. (It's permanently enabled)"

We found the cause of our VPN issues, which were caused by something else. 

[Zolo]

Hello Roy,

Could you share what caused the slowness problem in your environment?

[Roy_Smith]

Hi Zolo

The issue was tracked down to CoreXL and not enough CPU cores assigned to the VS. We enabled dynamic_balancing and all our VPN gateways are running fine at present