Traffic from Checkpoint Endpoint Security VPN client do not route correctly

[Michal133197]

Hello everyone,

i have routing problem with one specific device

Checkpoint VPN device is 1535 Appliance Version R81.10.10 (996002945)
Problem is to route VPN trafic to FortiGate50F

For local communication routing works correctly to Fortigate at x.x.8.1 and also for other subnets behind firewall x.x.0.0 and x.x.2.0
For VPN client i can connect to devices's connected to LAN2(x.x.8.3) and LAN3(x.x.8.100) but not to Fortigate(x.x.8.1) at LAN1
From devices at LAN2 and LAN3 i can connect to VPN Clients and to Fortigate as well

Using tracert on VPN Client to x.x.8.3(PC on LAN2) it routes correctly
Using tracert on VPN Client to x.x.8.1(Fortigate on LAN1) it does goes through Checkpoint router but does not reach fortigate (traffic is not blocked by Fortigate firewall for sure)

Remote Access for VPN clients is configured in Office Mode with subnet x.x.20.0

Thanks in advance

[Danny]

I suggest to check your logs and also your VPN topology. Your VPN routing might require a fix.

[the_rock]

What does route print show on cmd when client is connected?

Andy