Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Kosin_Usuwanthi
Collaborator

Client upgrade has failed with Automatic Upgrade from the Gateway

I already follow by Automatic Upgrade from the Gateway manual from Administration Guide.

Please help to advice.

0 Kudos
5 Replies
Kosin_Usuwanthi
Collaborator

Distributing the Remote Access Clients From the Gateway Use this procedure to distribute an upgrade of the Remote Access Clients from the Security Gateway. To distribute the Remote Access Clients from the gateway:

1. On the gateway, in the $FWDIR/conf/extender/CSHELL directory, back up the TRAC.cab and trac_ver.txt files.

2. Download the Remote Access Clients Automatic Upgrade file for your release from the Endpoint Security home page http://supportcontent.checkpoint.com/solutions?id=sk117536.

3. Put the new TRAC.cab and ver.ini files in the same directory on the gateway: $FWDIR/conf/extender/CSHELL

4. On a non-Windows gateway, run: chmod 750 TRAC.cab

5. Edit the trac_ver.txt file in the directory and change the version number to the number in the new ver.ini. Setting Up Remote Access Clients Remote Access Clients for Windows 32/64-bit Administration Guide E80.72 and Higher | 28

6. Make sure the client upgrade mode is set:

a) Open SmartDashboard or SmartConsole (for R80.x).

b) Open Global Properties > Remote Access > Endpoint Connect.

c) Set the Client upgrade mode to Ask user (to let user confirm upgrade) or Always upgrade (automatic upgrade).

d) Click OK.

7. Install the policy. When the client connects to the gateway, the user is prompted for an automatic upgrade of the newer version.

Kosin_Usuwanthi
Collaborator

Step 3. Put the new TRAC.cab and ver.ini files in the same directory on the gateway: $FWDIR/conf/extender/CSHELL

I have no see ver.ini from download link.

E80.82 Remote Access VPN Clients - Automatic Upgrade file 

0 Kudos
Peter_Kenda1
Participant

You need extract the E80.xx_TRAC.cab file. In that extract folder you can see two files: TRAC.msi and ver.ini file.

0 Kudos
Florian_Maier
Participant

i have the same problem.

i upload both files (ver.ini and trac.cab) to cshell

and have changed the trac_ver.txt

0 Kudos
Harshpal_Bhati
Employee
Employee

Updating for other user ..

i was assisting other customer who had similar issue .  We found below errors ,  on trac.log file at client side . also Customer was not using mobile access blade on R80.30 gateway but GAIA platform portal was set to 443 and we changed the GAIA portal to 4434 and issue resolved .

********************

24296 20780][30 Dec 18:42:40][TalkCCC] talkccc::RunSend: sending the following data for file download: GET /CSHELL/TRAC.cab HTTP/1.1
User-Agent: TRAC/986101507
Host: 1.2.3.4 
Connection: keep-alive
Cookie: CPCVPN_SESSION_ID=


[ 24296 20780][30 Dec 18:42:40][cpwssl] cpSSL_fwasync_pending: No input data is pending.
[ 24296 20780][30 Dec 18:42:40][cpwssl] cpWinSSL_fwasync_read: Peer has closed connection. 0 bytes not yet decrypted.

 

***********

0 Kudos