Hello!
I would like to ask if there's things that I lack in this current setup.
I have 2 NGFW clusters under 1 Smart-1 appliance, Cluster 1 and Cluster 2 is only connected through the MGMT port which is under X.X.4.0/24
The question is that I have already added my Office IP of 173.X.X.0/24 on Cluster 2's X.X.4.0/24 Internal Domain, also added it to Cluster 2's VPN domain, but I only see the following logs related to the traffic form 173.X.X.0 to Cluster 2:
I would assume that it would pass through a policy I created for this, but it always goes through the implied rule.
Hoping for your help on this one as I'm getting somewhat confused right now.
Thanks!
Expected behavior if Global Properties for Accept ICMP Requests is set to First, as shown here:
If you want this traffic to go through a configured Access rule, then this property will need to be changed.
| User | Count |
|---|---|
| 3 | |
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
