Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

2 Factor Authentication Securemote to 1550 appliance

I sucessfully configured SecuRemote Access (Windows 10, E82.30) to a 1550 Gateway (Centrally managed, R80.20.02) using Username/Password Authentication.

Now I want to modify the Authentication scheme to use 2 Factor Authentication with Dynamic ID. Is this supported for my environment

0 Kudos
3 Replies
Highlighted
Platinum

0 Kudos

Our setup cannot use any internal resources. The 1550 Firewall protects an OOB network Segment, and the Securemote Access from Internet is needed only when the internal infrastructure fails completely. The WAN-Interface of the firewall is connected directly to the ISP's router, and its LAN2-Interface connects to the OOB-Segment. So ALL authentication relevant actions MUST be performed from the gateway itself.

0 Kudos
Highlighted
Admin
Admin

DynamicID requires the full Mobile Access Portal, which is not available on SMB appliances.
0 Kudos