cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post

R80 IPS deployment

Jump to solution

Do we have a provision in R80 where we may separate IPS and Firewall rule base deployment- so that If I make change on IPS and if I don’t wish those IPS changes to be deployed on firewall module- I can hold that but still deploy firewall rule base changes?

is this possible in R80 management server?

0 Kudos
1 Solution

Accepted Solutions
Admin
Admin

Re: R80 IPS deployment

Jump to solution

Irrespective of whether you are using R80+ for management, the following rules apply:

  • For R77.x Gateways and earlier, Firewall and IPS policy must be pushed together.
  • For R80.10 Gateways and above, the IPS is treated as apart of the Threat Prevention layer and can be deployed separately from the Access Policy (Firewall).
0 Kudos
2 Replies
Admin
Admin

Re: R80 IPS deployment

Jump to solution

Irrespective of whether you are using R80+ for management, the following rules apply:

  • For R77.x Gateways and earlier, Firewall and IPS policy must be pushed together.
  • For R80.10 Gateways and above, the IPS is treated as apart of the Threat Prevention layer and can be deployed separately from the Access Policy (Firewall).
0 Kudos

Re: R80 IPS deployment

Jump to solution
0 Kudos