Capsule Connect version 1.600.110 MDM key pairs

[Tim_Dyke]

Hello All

I have been tasked with using an MDM to configure the CapsuleConnect VPN
The desire is to have:
1) the VPN always ON
2) Route-All-Traffic

We set the value on the CheckPoint Firewall global properties / remote access / SecureClient Mobile / Route all traffic to gateway to "configured on device"    This is by design, so we can have different VPN settings for the various use cases 

In the document https://support.checkpoint.com/results/sk/sk170298#
It mentions how to set up a custom VPN on you MDM, and gives us some key pairs.  It mentions the more parameters in the VPN Profile  Split tunneling / Route-All-Traffic
It does not mention the case for this key pair

Looking to answer, how to get the VPN to be always on automatically,  and Routing All Traffic through the VPN

Thanks in advance

[PhoneBoy]

I assume this is done by disabling the Split Tunneling setting in the Intune profile: https://learn.microsoft.com/en-us/mem/intune/configuration/vpn-settings-ios

[Tim_Dyke]

That would work for InTune.  Unfortunately we are using a different MDM
I opened a ticket with them as they are missing that configuration option

[PhoneBoy]

And the answer, unfortunately, is MDM dependent.
However, I imagine it'd be a similar option in whatever MDM you're using.