Hello.
(My old checkmate account was not accessible, so I created a checkmate account again.Jung_Patrick)
I also had the same symptoms.
It happened about,, two months ago?
At first I was getting error code 0-2000108.(sk170673)
I told the customer that they need to install a hotfix.
And the root cause was because of sk170673.
And while discussing the installation date without installing the hotfix, 3 new error codes popped up.
Error code 0-2000080
Error Code 0-2000184
Error Code 0-2000107
I opened the case and uploaded all the debugging contents, but the answer that came back was to install the latest hotfix and upload
the cpm doctor and cpinfo information again if a problem occurs and open the case again.
The answer is always the same.
Cutomer's mgmt is R80.40, T180 and smart-1 405 H.A.
GW is 5900 with 8Gb memory, R80.40 T120. (5ea)
It occurs randomly among the two firewalls, the server farm firewall and the Internet firewall.
For example, server farm FW 2 times, internet FW 1 times, install fail messages occur in this way. along with the error code.
TAC always asks to install the latest hotfix, but the customer wants the root cause such as the resolved issue list in the latest hotfix.
We don't want to install hotfixes without knowing what they will do. There are some customers who trust ccsp,
but there are many customer representatives who don't. It can be an embarrassing situation.
At first, I thought it was a code caused by GW running out of memory, but looking at your 16Gb memory, it doesn't seem like that either.
This is because our customer's 5900 generates swap memory of at least 1Gb and at most 3Gb.
As a result, I haven't been able to install the R80.40 T192 Latest hotfix yet.
The customer has also agreed to install it, but no date has been set yet.
thank you.