Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
quad_fwm
Explorer
Jump to solution

Upgrade of SMS from R80.10 to R80.40

I am trying to do a lab of an upgrade from a R80.10 to R80.40  from the SMS web UI using the CPUSE.  I have uploaded the upgrade file and the SMS rebooted with the output attached. 
Note that this is an open server on eve-ng 

 

 

 

0 Kudos
1 Solution

Accepted Solutions
PhoneBoy
Admin
Admin

Minimum hardware requirements for the VM are here: https://sc1.checkpoint.com/documents/R81.10/WebAdminGuides/EN/CP_R81.10_RN/Topics-RN/Hardware-Requir... 

Note these are from R81.10, but should be more or less the same for R80.40.

View solution in original post

0 Kudos
5 Replies
_Val_
Admin
Admin

It looks like the file system crashed. Are you sure you had enough space before the upgrade?

0 Kudos
quad_fwm
Explorer

The device has 80GB total memory and with about 20-30GB free at the time of upgrade. 
I will set the lab up again with more space.
What is the recommended space require to be available before an upgrade ?
Thanks for your response

0 Kudos
PhoneBoy
Admin
Admin

Minimum hardware requirements for the VM are here: https://sc1.checkpoint.com/documents/R81.10/WebAdminGuides/EN/CP_R81.10_RN/Topics-RN/Hardware-Requir... 

Note these are from R81.10, but should be more or less the same for R80.40.

0 Kudos
quad_fwm
Explorer

Thank you 
I figured it was a hardware constraint issue, will run the upgrade with the right requirements.

0 Kudos
the_rock
Legend
Legend

Make sure before the upgrade to run verify from web UI, as that will tell you if upgrade will run. If not, it will tell you why.

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events