Problem VSX cant be deleted

[skandshus]

Hi..

so i got a cluster of 2* 6200 in a cluster, running 1 VSX virtual system.

Everytime i try to delete it. it causes errors

I right click the virtual system. Press Delete. then OK.

then it starts deleting, and gives me an error saying that i need to check SIC communication on the cluster members..

this sic error comes everytime i try to delete the virtual system & then the 2* 6200 stops responding on the SIC port 18191.

i can reset the sic, and get the cluster working again, only to reproduce the same error when i try again

Delete virtuel system>ok> Sic error.

how do i get around that?!

[genisis__]

Can you paste the exact message?

What version are you running and what Jumbo is installed?

Have you logged a case with TAC?

[skandshus]

"" report says " 

Checking connection with VSX
Deleting VSX-FW1-IT-Connect ...
Generating VSX Configuration for VSX-FW1-IT-Connect deletion from ITC-Cluster.
Pushing VSX Configuration to ITC-Cluster.
GW6200B: processed 5% of configuration...
GW6200A: processed 5% of configuration...
Failed to configure ITC-Cluster with the following errors:
GW6200B error :TCP connectivity failure ( port = 18191 )( IP = 10.10.101.33 )[ error no. 10 ].
GW6200A error :TCP connectivity failure ( port = 18191 )( IP = 10.10.101.32 )[ error no. 10 ].

Virtual System Deletion Completed with Errors

attached photo

Now SIC drops 5 sec later. all cluster members and the VSX turns red with sic error.
i can reset SIC and then everything is "working" again.. then if i try to delete Virtuel system it will fail all over again.

Running latest r81.10 Jumbo on Manager and Cluster members

no case with TAC yet

[skandshus]

and there we go. SIC down.

[genisis__]

Have you disabled implied rules and the defined them manually? 

[skandshus]

No implied rules are in place…. I have checked.: got other gateway that keeps working.. so implied rules are active