Integrating Check Point identity based access into Cisco ISE environments - video

[Peter_Elmer]

In this video you will learn about the design principals integrating Check Point into Cisco ISE environments. The video takes less than 15 minutes. 

Make sure you know the basic concepts of identity based access control documented here. 

Content

• Reviewing the basic concepts for identity based security
• Overview of the integration to Cisco ISE controlled environments
• Understanding the advantages of Access Role objects
• Importing SGT objects from Cisco ISE using CloudGuard Controller
• Scale identity sharing

Have fun 🙂

[Johan_Persson]

Is there a reason why the video is not working?

[PhoneBoy]

Hi, it seems to be working for me.
If it's still not working for you, can you describe the behavior and/or post a screenshot?

[Christian_W]

Is IPv6 (dual-stack device) supported with dynamic SGTs?

[Peter_Elmer]

You should see IPv6 address in the identity session generated on event learned from Identity Collector if the source (Cisco ISE) provides this IP address inside the pxGrid communication towards the ID Collector, I checked sk39374  and sk92368 and didn't find documented limitations.