If can R77.30 send log to R80.30

[Jeff_Gao]

Dear all

         I have a R77.30 SMS,now, i want to R80.30 as my smartlog and smartevent server,if can i do it,thanks!

[Wolfgang]

Yonghao,

R80.30 SMS can manage and accept logs from R77.30 gateways.
You can check this in the release notes of R80.30
https://sc1.checkpoint.com/documents/R80.30/WebAdminGuides/EN/CP_R80.30_RN/html_frameset.htm

regards
Wolfgang

[Jeff_Gao]

Thanks wolfgang,but i want to know that if  can  R80.30 log server  accept logs from R77.30 SMS.Because i am useing r77.30 sms and it mgmt 100+ gateway,I want R80.30 as a log server of all gateway

[G_W_Albrecht]

What for do you want to do that ? You have a  lot of work to get all R77.30 installations to R80.xx during the next month, as Support for R77.30 ends in September...

[Wolfgang]

Ok, I understand now what you want.

For smartevent this is possible, but not for the logging part. The newer server have to read the logs from an older version.

Ther's a detailed description in sk110894

How to configure an R80/R80.x SmartEvent Server with an R77.x Security Management

limitation:

• R80/R80.x SmartEvent cannot also be the Log Server (when the management version is lower than R80), since the Log Server and the management must be on the same version (see sk42080)

regards

Wolfgang

[Jeff_Gao]

Hi Wolfgang
thanks very much.
can you download "SmartEvent_R80_change_dbsync_mode.sh"? I haven't permission to download it

[Wolfgang]

Yonghao,

normally you should have access to this file with your usercenter account.

If not, please contact your local CheckPoint partner to get the file or access to it.

regards

Wolfgang

[Jeff_Gao]

thanks

[Jeff_Gao]

"SmartEvent_R80_change_dbsync_mode.sh" is default system-provided