HowTo: Block IoT scanners like Shodan, Censys, Shadowserver, PAN Expanse etc.

[Danny]

Protect your environment against all those internet IoT port scanners / web crawlers that scan your network devices to collect all kind of data. Simply create a drop rule and put it on the beginning of your security policy. Create a network group for each of these scanners and fill it with the data listed below.

Supported scanners:

• Shodan --> see Check Point Threat Alert
• Censys --> see their FAQ
• Shadowserver --> see their FAQ
• PAN Expanse --> feeds their Expander

Sample rule:

Group contents:

• Shodan --> create domain objects with FQDN enabled!
  • .census1.shodan.io
  • .census2.shodan.io
  • .census3.shodan.io
  • .census4.shodan.io
  • .census5.shodan.io
  • .census6.shodan.io
  • .census7.shodan.io
  • .census8.shodan.io
  • .census9.shodan.io
  • .census10.shodan.io
  • .census11.shodan.io
  • .census12.shodan.io
  • .atlantic.census.shodan.io
  • .pacific.census.shodan.io
  • .rim.census.shodan.io
  • .m247.ro.shodan.io
  • .pirate.census.shodan.io
  • .ninja.census.shodan.io
  • .border.census.shodan.io
  • .burger.census.shodan.io
  • .house.census.shodan.io
  • .mason.census.shodan.io
  • .turtle.census.shodan.io
  • .goldfish.census.shodan.io
  • .flower.census.shodan.io
  • .dojo.census.shodan.io
  • .cloud.census.shodan.io
  • .sky.census.shodan.io
  • .inspire.census.shodan.io
  • .battery.census.shodan.io
• Censys
  • 74.120.14.0/24
  • 162.142.125.0/24
  • 167.248.133.0/24
  • 192.35.168.0/23
• Shadowserver
  • 64.62.202.96/27
  • 66.220.23.112/29
  • 74.82.47.0/26
  • 184.105.139.64/26
  • 184.105.143.128/26
  • 184.105.247.192/26
  • 216.218.206.64/26
  • 141.212.0.0/16
• PAN Expanse
  • 144.86.173.0/24
• Others
  • see listing

Additional info:

Adding such a drop rule on top of your access control rulebase helps raising the baseline security level of your overall firewall security policy. Other free methods to raise it even more are:

• dynamically block blacklisted IPs early - even before your access control rulebase
  • or via Custom Intelligence Feeds (IoC Management) if you have AV/ABOT licensed
  • or via Generic DataCenter objects starting from R81+
• create a leading ordered layer to drop unwanted incoming traffic based on Geo Location
• use SNORT rules to advance your IPS protection profile
  • if you don't have IPS licensed, use at least IPS Core Protections and Inspection Settings that are both installed with your access control policy
• activate HTTPS inspection
• enable and use Content Awareness
• enable and use Identity Awareness

[_Val_]

Nice one Danny!

[Kim_Moberg]

Great work Danny.

Would have been nice if Check Point could add those hosts as dynamic objects so it would be automatically updated when any of the scanners changes ip subnets

[_Val_]

@Kim_Moberg the best way to request this is to add a feedback note to sk173416. 

Citing from the SK:

Can I suggest to support a specific service as an Updatable object?

Suggestions for additional Updatable objects can be submitted in the "Give us Feedback" section of the SecureKnowledge article, with the relevant information that will be rendered by R&D (who is responsible for adding new updatable objects). The most common suggestions will get highest priority:

• Service name
• Link to public content maintained by the vendor
• Is it currently used in my policy?

[kevinds]

Censys has different and more IPs listed to Opt-Out as per,

https://support.censys.io/hc/en-us/articles/360043177092-Opt-Out-of-Scanning