- CheckMates
- :
- Products
- :
- Quantum
- :
- Management
- :
- Change gateway Ip adress
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
Are you a member of CheckMates?
×- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Change gateway Ip adress
Hi all,
need your help, I'm doing some test, we need to change IP address of the gateways but leave current IP address in Console.
Example:
Environment is VSX:
Gateway1 IP 10.10.0.70 (Mgmt interface) --- new ip address
Gateway 2 IP 10.10.0.71 (Mgmt Interface) --- new ip address
Virtual VSX 10.10.0.73 --- new ip address
before all the subnet was in the same subnet 10.122.2.0
Console 10.122.2.254. same ip address (Old subnet).
I have ran vsx_util to change subnet.-
It's working but not very well, it could be that the gateways and Console must be in the same subnet or not necessary ??
Best practices from checkpoint gateways must be in the same subnet (it's ok) but nothing regarding the console.
Regards and thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The gateway and management do not need to be in the same subnet.
Clustered gateways generally do need to be in the same subnet (VSX or otherwise).
And define "working but not very well."
What precise symptoms are you seeing?
Also version/JHF level of gateways.