Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Rabindra_Khadka
Contributor

Can we migrate checkpoint management server r80.30 from Open Server to Checkpoint Smart-1

Hello Everyone!

 

Can you please tell me or share me the link, to migrate checkpoint management server from OPEN SERVER to Checkpoint SMART-1

Thank You.

 

0 Kudos
2 Replies
PhoneBoy
Admin
Admin

This can be accomplished with the standard migration tools.
The basic steps are covered in the Install and Upgrade guide for R80.30 under "Special Scenarios for Management Servers": https://sc1.checkpoint.com/documents/R80.30/WebAdminGuides/EN/CP_R80.30_Installation_and_Upgrade_Gui...

At a high level, you're taking a migrate_server export from the Open Server, installing R80.30 fresh on the Smart-1, then migrate_server import on the Smart-1.

Logs can (and probably should, if you have a lot of them) be migrated separately.
You will also have to kick off a reindexing process.
Believe both of these are covered in the guide.
0 Kudos
Danny
Champion Champion
Champion

 Step 1: Export the configuration from your Open Server. Login via SSH into expert mode and run cpstop. Then:

  1. Export the OS config via: clish -s "save configuration <file>
  2. Export the Software config via: migrate export <file>

 Step 2: Change the IP address of the Open Server temp. to a different one.

Step 3: Install the same Check Point Gaia version and Jumbo Hotfix take on your Smart-1 appliance as it is running on our Open Server (Use the original IP address your Open Server had before you changed it to a temp. IP). Run the 1st time wizard to install the management software and reboot.

Step 4: SCP the exported files to your Smart-1 appliance.

Step 5: Login to the expert more of your Smart-1 appliance and run cpstop. Then:

  1. Import the OS config via: clish -s "import configuration <file>
  2. Import the Software config via: migrate import <file>

Step 6: SCP and additional files, such a log files, files from the /home/username directories to your Smart-1 appliance that you might want to keep.

Step 7: Reboot your Smart-1 appliance and you should be read to work with it. If everything is fine, power off your Open Server, if not, troubleshoot.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events