Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
gtzakis
Participant

CLI access denied through serial

Hello there,

i have a gateway, that all users can connect through webUI & ssh on clish and expert mode. But we cannot connect to clish through console(serial).

So, the problem is that we are going to do some big changes and we want to make sure that we have console access if we have a problem. We can connect to expert mode, if we change the user's default shell to bash, but from expert when we execute "clish" we get "User: admin denied access via CLI" error for every user we tried.

After researching the knowledge base, i found the sk102828 which needs fail-over and this gateway is not clustered.

Does anyone had this issue before? Any ideas?

Thank you!

0 Kudos
4 Replies
Jerry
Mentor
Mentor

cpinfo -y all please

Jerry
0 Kudos
Jerry
Mentor
Mentor

also try this from any user clish available:

set user admin shell /etc/cli.sh

add rba user admin roles adminRole

unless those lines are already in place?

> show configuration user

Jerry
0 Kudos
gtzakis
Participant

Hello Jerry,

the admin user has already default shell the /etc/cli.sh and by default has the adminRole.

Please be advice that when you ssh into the machine everything works fine, only when you try serial connection the issue occurs.

0 Kudos
(1)
Jerry
Mentor
Mentor

fine. gotcha.

please provide output from following commands:

1. cpinfo -y all

2. uname -a

3. ntpq -pn

4. date

Let's see though what you really run there, before that it is extremely difficult to say why "console" connection behave as described.

On a side note, are you doing the "console hook-up" by Console Port or mini-USB one? is it done by Mac or PC? have you tried that on more than one computer?

Jerry
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events