Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Wolfgang
Authority
Authority

interoperability with Cisco QSFP

Hello CheckMates,

we need some advice connecting a MHO-175 with Cisco Nexus Switch via singlemode QSFP.

On the MHO we use "CPAC-TR-40LR-QSFP-10Km", but Cisco has more then one QSFP available for 40G singlemode

WSP-Q40GLR4L

QSFP-40G-LR4-S

QSFP-40G-LR4

Check Point QSFP supports 10km, we need only 500m.

Cisco 40GBASE QSFP Modules Data Sheet 

Wolfgang

0 Kudos
2 Replies
Tobias_Moritz
Advisor

Unofficial and untested answer from me:

As "CPAC-TR-40LR-QSFP-10Km" uses protocol 40GBase-LR4 and you only need 500 meters, all three should work because they implement the same protocol.

If I were you, I would choose 2km limited WSP-Q40GLR4L, its way cheaper than the other two. Check Cisco TMG matrix to make sure this transceiver is supported in your specific Nexus model and software version. In case you cannot use this lite version, I suggest using the S-class "QSFP-40G-LR4-S" because it is cheaper than the last one.

For an official answer, someone from CP has to answer. Or someone here in the community knows a link to a CP documentation were interoperability with a specify Cisco transceiver is guaranteed.

0 Kudos
Wolfgang
Authority
Authority

@Tobias_Moritz that's exactly what we thinking about it. But we have to go sure. 

WSP-Q40GLR4L is much cheaper then the QSFP-40G-LR4.

0 Kudos