Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Simon_Macpherso
Advisor

Sync Port Redundancy

Hello,

Can anyone confirm if sync port redundancy is now supported and have tested it in lab or production? i.e. enable an additional port e.g. port 47, in each MHO-140 orchestrator as a sync port to the default sync port 48.  

It appears to have been introduced in Take 210 (05 Jan 2020) via ID MBS-7993

Enhancement: Added the ability to configure multiple physical ports as the Sync port on Maestro Orchestrator. Configuration is performed from Gaia Clish on the Maestro Orchestrator.
  • To configure multiple ports for the Internal Sync (between Orchestrators on the same site) run: 'set maestro port <port number>  type ssm_sync'
  • To configure multiple ports for the External Sync (between Orchestrators on different sites) run: 'set maestro port <port number> type site_sync'

 

Environment:

2 x MHO-140 running R80.20SP GA take 295 

2 x 6200 Plus Gateways running R80.30SP GA take 49

 

Regards,

Simon

0 Kudos
1 Reply
Chris_Atkinson
Employee Employee
Employee

For those reading at home MHO Sync is different than traditional Sync and more relevant in multi-site deployments since their it is the only path between SGMs at the other location.

CCSM R77/R80/ELITE
0 Kudos