Maestro Masters
Round Table session with Maestro experts
Hi,
I'm in the process of deploying 2 x MHO-140 Orchestrators and 2 x 6200 plus gateways.
All cabling has been completed.
Licenses have been manually applied to each gateway.
Both gateways are showing in Orchestrators -> unassigned gateways
MHO-140 Orchestrators are running R80.20SP GA take 295
6200 Gateways are running R80.30SP GA take 49 (we were advised R80.30SP could be installed on the gateways)
Ive created one security group, assigned one gateway and assigned mgmt and uplink interfaces and vlans. Applied topology.
I added a second gateway and assigned mgmt and uplink interfaces and vlans. Applied topology.
Issue
Member 1_2 SGM is DOWN.
On member 1, the output of show smo verifiers report shows a chassis error.
On member 2, the output of show smo verifiers report shows a chassis error and a MAC address verification error.
Below I’ve included the output of asg stat -v on member 1, show smo verifiers report on member 1 and 2 and mac_verifier -v on member 2.
[Local SGM] fw-adi-maestro-ch01-01> asg stat -v
--------------------------------------------------------------------------------
| System Status - Maestro |
--------------------------------------------------------------------------------
| Up time | 22:47:19 hours |
| SGMs | 1 / 2 ! |
| Version | R80.30SP (Build Number 47) |
--------------------------------------------------------------------------------
| SGM ID Chassis 1 |
| ACTIVE |
--------------------------------------------------------------------------------
| 1 ACTIVE(!) |
| 2 DOWN |
--------------------------------------------------------------------------------
| Chassis Parameters |
--------------------------------------------------------------------------------
| Unit | Chassis 1 | Weight |
--------------------------------------------------------------------------------
| SGMs | 1 / 2 ! | 6 |
| Ports | | |
| Standard | 0 / 0 | 11 |
| Bond | 0 / 0 | 11 |
| Other | 0 / 0 | 6 |
| Sensors | | |
| SSMs | 2 / 2 | 11 |
| | | |
| Grade | 28 / 34 ! | - |
--------------------------------------------------------------------------------
| Synchronization |
| Sync to Active chassis: Enabled |
--------------------------------------------------------------------------------
[Local SGM] fw-adi-maestro-ch01-01> show smo verifiers report
Duration of tests vary and may take a few minutes to complete
--------------------------------------------------------------------------------
| Tests Status |
--------------------------------------------------------------------------------
| ID | Title | Result | Reason |
--------------------------------------------------------------------------------
| System Components |
--------------------------------------------------------------------------------
| 1 | System Health | Failed (!) | (1)Chassis 1 error |
| 2 | Resources | Passed | |
| 3 | Software Provision | Passed | |
| 4 | Media Details | Passed | |
| 5 | SSD Health | Passed | |
| 6 | Firmware Verifier | Passed | |
--------------------------------------------------------------------------------
| Policy and Configuration |
--------------------------------------------------------------------------------
| 7 | Distribution Mode | Passed | |
| 8 | DXL Balance | Passed | |
| 9 | Policy | Passed | |
| 10 | AMW Policy | Passed | (1)Not configured |
| 11 | SWB Updates | Passed | (1)Not configured |
| 12 | Installation | Passed | |
| 13 | Security Group | Passed | |
| 14 | Cores Distribution | Passed | |
| 15 | Clock | Passed | |
| 16 | Licenses | Passed | |
| 17 | IPS Enhancement | Passed | |
| 18 | Configuration File | Passed | |
--------------------------------------------------------------------------------
| Networking |
--------------------------------------------------------------------------------
| 19 | MAC Setting | Passed | |
| 20 | ARP Consistency | Failed (!) | (1)Verifier error - Check raw output |
| 21 | Bond | Failed (!) | |
| 22 | IPv4 Route | Passed | |
| 23 | IPv6 Route | Passed | (1)Not configured |
| 24 | Dynamic Routing | Passed | (1)Not configured |
| 25 | Local ARP | Passed | (1)Not configured |
| 26 | IGMP Consistency | Passed | (1)Not configured |
| 27 | PIM Neighbors | Passed | (1)Not configured |
--------------------------------------------------------------------------------
| Misc |
--------------------------------------------------------------------------------
| 28 | Core Dumps | Passed | |
| 29 | Processes | Passed | |
| 30 | Performance hogs | Failed (!) | |
--------------------------------------------------------------------------------
| Tests Summary |
--------------------------------------------------------------------------------
| Passed: 26/30 tests |
| Run: "show smo verifiers list id 1,20,21,30" to view a complete list of fail |
| ed tests |
| Output file: /var/log/verifier_sum.1-30.2020-11-04_10-10-30.txt |
| Run "show smo verifiers last-run print" to display verbose output |
--------------------------------------------------------------------------------
[Local SGM] fw-adi-maestro-ch01-02> show smo verifiers report
Duration of tests vary and may take a few minutes to complete
--------------------------------------------------------------------------------
| Tests Status |
--------------------------------------------------------------------------------
| ID | Title | Result | Reason |
--------------------------------------------------------------------------------
| System Components |
--------------------------------------------------------------------------------
| 1 | System Health | Failed (!) | (1)Chassis 1 error |
| 2 | Resources | Passed | |
| 3 | Software Provision | Passed | |
| 4 | Media Details | Passed | |
| 5 | SSD Health | Passed | |
| 6 | Firmware Verifier | Passed | |
--------------------------------------------------------------------------------
| Policy and Configuration |
--------------------------------------------------------------------------------
| 7 | Distribution Mode | Passed | |
| 8 | DXL Balance | Passed | |
| 9 | Policy | Passed | |
| 10 | AMW Policy | Passed | (1)Not configured |
| 11 | SWB Updates | Passed | (1)Not configured |
| 12 | Installation | Passed | |
| 13 | Security Group | Passed | |
| 14 | Cores Distribution | Passed | |
| 15 | Clock | Passed | |
| 16 | Licenses | Passed | |
| 17 | IPS Enhancement | Passed | |
| 18 | Configuration File | Passed | |
--------------------------------------------------------------------------------
| Networking |
--------------------------------------------------------------------------------
| 19 | MAC Setting |
Failed (!) | (1)Inconsistent Firewall value and MA |
| | | | C Address |
| 20 | ARP Consistency | Failed (!) | (1)Verifier error - Check raw output |
| 21 | Bond | Passed | (1)Not configured |
| 22 | IPv4 Route | Passed | |
| 23 | IPv6 Route | Passed | (1)Not configured |
| 24 | Dynamic Routing | Passed | (1)Not configured |
| 25 | Local ARP | Passed | (1)Not configured |
| 26 | IGMP Consistency | Passed | (1)Not configured |
| 27 | PIM Neighbors | Passed | (1)Not configured |
--------------------------------------------------------------------------------
| Misc |
--------------------------------------------------------------------------------
| 28 | Core Dumps | Passed | |
| 29 | Processes | Passed | |
| 30 | Performance hogs | Failed (!) | |
--------------------------------------------------------------------------------
| Tests Summary |
--------------------------------------------------------------------------------
| Passed: 26/30 tests |
| Run: "show smo verifiers list id 1,19,20,30" to view a complete list of fail |
| ed tests |
| Output file: /var/log/verifier_sum.1-30.2020-11-04_05-08-30.txt |
| Run "show smo verifiers last-run print" to display verbose output |
--------------------------------------------------------------------------------
[Expert@fw-adi-maestro-ch01-02:0]# mac_verifier -v
--------------------------------------------------------------------------------
Collecting information from SGMs...
^C
[Expert@fw-adi-maestro-ch01-02:0]# mac_verifier -v
--------------------------------------------------------------------------------
Collecting information from SGMs...
--------------------------------------------------------------------------------
Verifying FW1 mac magic value on all SGMs...
FW1 mac magic value on all SGMs:
Command completed successfully
Success
--------------------------------------------------------------------------------
Verifying IPV4 and IPV6 kernel values...
IPV6 is not enabled
Success
--------------------------------------------------------------------------------
Verifying FW1 mac magic value in /etc/smodb.json...
FW1 mac magic value and /etc/smodb.json value are the same (217)
Success
--------------------------------------------------------------------------------
Verifying MAC address on local chassis (Chassis 1)...
-*- 1 blade: 1_01 -*-
BPEth0 MAC address of BPEth0 is correct
-*- 1 blade: 1_01 -*-
BPEth1 MAC address of BPEth1 is correct
MAC address inconsistency found on interface eth1-05 (FW1 value is different)
-*- 1 blade: 1_01 -*-
eth1-05 00:1c:7f:82:05:d9
Keep in mind that the up / down state will only change when you apply a policy, so first install the policy before you start checking the state. When the gateway is shown in the Maestro configuration page, you should be just fine.
Hi,
My understanding (from the r80.30sp admin guide) is that the policy is first installed on the SMO master. The SMO master then copies the policy and security appliances configuration to all security appliances in the UP state. When the security appliance enters the UP state, it automatically gets the installed policy and configurations that are installed, from the SMO.
As member 1_2 is currently in down state, will the master be able to copy the policy to the other member?
Regards,
Simon
To confirm all SGMs were present when the policy was installed?
Hi,
I've exact same appliances, versions and similar error. ARP Consistency error.
| 20 | ARP Consistency | Failed (!) | (1)MAC inconsistencies
==============================
ARP Consistency:
==============================
Address HWtype HWaddress Flags Mask Iface SGMs
10.10.0.100 . (incomplete) . bond5.5 1_02
10.10.0.100 ether 00:0c:29:80:57:77 C bond5.5 1_01
ARP is incomplete on SGM2 and some traffics dropping. Still can't solving this issue.... I guess there is something wrong sync between SGMs and it could be the kernel or os issue...
Did you make sure with lldpctl that all connections are up and running?
What is the solution, I running through similar issues with MHO 140
show smo verifiers report
Duration of tests vary and may take a few minutes to complete
--------------------------------------------------------------------------------
| Tests Status |
--------------------------------------------------------------------------------
| ID | Title | Result | Reason |
--------------------------------------------------------------------------------
| System Components |
--------------------------------------------------------------------------------
| 1 | System Health | Failed (!) | (1)Chassis 1 error |
| 2 | Resources | Passed | |
| 3 | Software Provision | Passed | |
| 4 | Media Details | Passed | |
| 5 | SSD Health | Passed | |
| 6 | Firmware Verifier | Passed | |
--------------------------------------------------------------------------------
| Policy and Configuration |
--------------------------------------------------------------------------------
| 7 | Distribution Mode | Passed | |
| 8 | DXL Balance | Passed | |
| 9 | Policy | Failed (!) | |
| 10 | AMW Policy | Passed | (1)Not configured |
| 11 | SWB Updates | Passed | (1)Not configured |
| 12 | Installation | Passed | |
| 13 | Security Group | Passed | |
| 14 | Cores Distribution | Passed | |
| 15 | Clock | Passed | |
| 16 | Licenses | Failed (!) | (1)Licenses differ across members |
| 17 | Configuration File | Passed | |
--------------------------------------------------------------------------------
| Networking |
--------------------------------------------------------------------------------
| 18 | MAC Setting |
Failed (!) | (1)Inconsistent Firewall value and MA |
| | | | C Address |
| 19 | ARP Consistency | Failed (!) | (1)Verifier error - Check raw output |
| 20 | Bond | Failed (!) | |
| 21 | IPv4 Route | Passed | |
| 22 | IPv6 Route | Passed | (1)Not configured |
| 23 | Dynamic Routing | Passed | (1)Not configured |
| 24 | Local ARP | Passed | (1)Not configured |
| 25 | IGMP Consistency | Passed | (1)Not configured |
| 26 | PIM Neighbors | Passed | (1)Not configured |
--------------------------------------------------------------------------------
| Misc |
--------------------------------------------------------------------------------
| 27 | Core Dumps | Passed | |
| 28 | Performance hogs | Passed | |
--------------------------------------------------------------------------------
| Tests Summary |
--------------------------------------------------------------------------------
| Passed: 22/28 tests |
Is this a new build? Is there a policy installed? What're the details for that failed check? If you check the details of the failed tests they will generally give you a good idea of what it's alerting on.
This issue is resolved yesterday. Thanks Emmap for the response.
Hello Anikarlam
May i know what was done to resolve the issue ? i am in similar situation
Dear Anikaralam,
How to fix this issue? Please, i am in similar error.
Issue resolved after installing policy
Leaderboard
Epsum factorial non deposit quid pro quo hic escorol.
| User | Count |
|---|---|
| 4 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
About CheckMates
Learn Check Point
Advanced Learning
YOU DESERVE THE BEST SECURITY
