Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
adamfofo1
Participant
Participant
Jump to solution

Mix of SFP with fibre and DAC cables two MHO-140 single site, one security-group.

Hello,

I've a question about connection between two MHO-140 and SGM's(6600) in a single site, one security group configuration.

We have right now one MHO-140 and 3 SGM's(6600) in the first room running and  we plan to add one more MHO-140 and three  SGM's (6600) and put them in the different room in the same building. 

No switches or routers will be between two MHO-140 and the distance between two rooms is around 50 meters.

The running SGM's in the room nr:1 are connected  to the first running MHO-140 downlink ports  via dac cables and I would like to know if that is supported to connect SMGs from the room nr:1 through fiber cables with SFP (10G-short-range) transceiver to the  secondary upcoming MHO-140 downlink ports  in the room 2 and do the same for the upcoming SGM's in the room nr:2 and connect them  to the MHO-140 in the first room?

 

Thanks a lot

 

1 Solution

Accepted Solutions
Dario_Perez
Employee Employee
Employee

Hi

Yes is supported 

Maestro Frequently Asked Questions (FAQ)

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

  • Is it supported to use fiber transceivers/cables for downlinks?
    Yes:
    • Up to 300m length Short Range with suitable 10Gbps/40Gbps transceivers, and up to 100m with 100Gbps transceivers (see sk92755)
    • UUp to 10km length Long Range with suitable 10Gbps/40Gbps/100Gbps transceivers (see sk92755)
    These limitations are related to transceivers’ physical capabilities. Connection through patch panel is supported.

     

View solution in original post

2 Replies
Dario_Perez
Employee Employee
Employee

Hi

Yes is supported 

Maestro Frequently Asked Questions (FAQ)

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

  • Is it supported to use fiber transceivers/cables for downlinks?
    Yes:
    • Up to 300m length Short Range with suitable 10Gbps/40Gbps transceivers, and up to 100m with 100Gbps transceivers (see sk92755)
    • UUp to 10km length Long Range with suitable 10Gbps/40Gbps/100Gbps transceivers (see sk92755)
    These limitations are related to transceivers’ physical capabilities. Connection through patch panel is supported.

     

adamfofo1
Participant
Participant

Great, Thank you for the reply.

0 Kudos