Maestro dual site, interfaces with different media per site

[Wolfgang]

In a dual site environment you have to use the same interface configuration on both sites. Meaning, if you have 40Gb/s at siteA the same port at siteB has to be 40Gb/s.

But how about mixing media types like single mode / multimode QSFPs. Is it supported to use 40GB/s singlemode at siteA  and 40GB/s multimode at siteB ?

Our requirement is for uplink ports only.

[Dario_Perez]

Each MHO can work independent you can set to different link-speed or different SFP. As per my understanding this is supported. but we have to check 

[emmap]

You can use different transceivers between the two sites, but as you say the speed configuration will be sync'd.