Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Alex_Shpilman
Collaborator

Maestro SG Management

Jump to solution

Hi Check Mates,

 

Can multiple security groups be managed out of the same management ports on the MHO using magg interfaces? 

On MHO-170 there are 2 management ports, which can split to 8x10G, which is aligned with the amount of possible security groups.

However, the MHO-140 can have only 4 management ports, so I suppose it should be supported but can't find any reference of that in the admin guide.

It seems a bit of an overkill to have 2x 10G (active/standby) management ports per SG... 

Thanks.

 

0 Kudos
1 Solution

Accepted Solutions
Anatoly
Employee
Employee

Dear Alex,

Regarding MHO-170, you can split only one Management port (port 1), as in case of splitting port 2 will be disabled. So, in order to get 8 management ports, you need two orchestrators.

Regarding using same management ports for different security groups - it is possible, but only if you use management IPs within the same broadcast domain.

Thank you,

View solution in original post

2 Replies
Anatoly
Employee
Employee

Dear Alex,

Regarding MHO-170, you can split only one Management port (port 1), as in case of splitting port 2 will be disabled. So, in order to get 8 management ports, you need two orchestrators.

Regarding using same management ports for different security groups - it is possible, but only if you use management IPs within the same broadcast domain.

Thank you,

View solution in original post

Alex_Shpilman
Collaborator

Thanks @Anatoly

 

 

0 Kudos