Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
kb1
Collaborator
Jump to solution

ha management lab error

So for some reason in my lab, on the secondary server im not able to set it up, on trying to fetch the topology it shows "internal error, probably not enough memory" even though there i senough memory and cpu resources, also cannot enable any of the blades as it shows the following, look screenshots below-

fetch topoogy error.PNGError.PNG

So as you can see in the first pic the error, no idea why i get that and in the second pic under management i try to enable the policy management and that pop up appears as shown, reset sic multiple times to no effect, now how do i check it as secondary server? i mean i already selected it as secondary server during first time configuration so why does it ask me to do that? and how do i do that through cli if i must do it again anyways? Also why does the network security section appear (in the second pic) even though this is a management server (yes i did select it as seccurity management server during first time config!!) why is all this happening? why cant it let me configure HA in peace?????

 

Other details-

Laptop- Aero 15 classic - i7-9750h, 32gb ram, 1tb ssd , rtx 2070 mq

windows 10 build 18363

 

Running the topology on gns3 2.2.0 and vmware workstation pro 15.5.1 build-15018445

 

I will provide other details if needed.

 

0 Kudos
1 Solution

Accepted Solutions
HeikoAnkenbrand
Champion Champion
Champion

Hi @kb1,

use 8GB for SMS.

Cut from R80.20 readme:

Component

Security Gateway

VSX Gateway

Security Management Server/Standalone/Endpoint Security

Multi-Domain Server

Processor

Intel Pentium IV, 2 GHz or equivalent

Intel Pentium IV, 2 GHz or equivalent

Intel Pentium IV, 2.6 GHz or equivalent

Dual Socket 2x Xeon E5-2609v2

4 cores, 2.5 GHz or equivalent

Total CPU Cores

2

2

2

8

Memory

4 GB RAM

4 GB RAM

6 GB RAM

32 GB RAM

Free Disk Space

15 GB

12 GB + 1 GB per VS

500 GB (Installation includes OS)

1 TB (Installation includes OS)

 

➜ CCSM Elite, CCME, CCTE

View solution in original post

6 Replies
HeikoAnkenbrand
Champion Champion
Champion

For R80.30/R80.40 use 8 GB for SMS and 4 GB for gateways. This works in my LAB.

GNS3 need 4 GB (recommended 8G).

➜ CCSM Elite, CCME, CCTE
0 Kudos
kb1
Collaborator

I'm using 4gb on my primary server that one worked without issues, why can't it work for the other one then?
And the versions are R80.20 for the servers.

0 Kudos
HeikoAnkenbrand
Champion Champion
Champion

Hi @kb1,

use 8GB for SMS.

Cut from R80.20 readme:

Component

Security Gateway

VSX Gateway

Security Management Server/Standalone/Endpoint Security

Multi-Domain Server

Processor

Intel Pentium IV, 2 GHz or equivalent

Intel Pentium IV, 2 GHz or equivalent

Intel Pentium IV, 2.6 GHz or equivalent

Dual Socket 2x Xeon E5-2609v2

4 cores, 2.5 GHz or equivalent

Total CPU Cores

2

2

2

8

Memory

4 GB RAM

4 GB RAM

6 GB RAM

32 GB RAM

Free Disk Space

15 GB

12 GB + 1 GB per VS

500 GB (Installation includes OS)

1 TB (Installation includes OS)

 

➜ CCSM Elite, CCME, CCTE
kb1
Collaborator

So as you suggested i increased the ram of that server to 8gb and even tried 9gb and just as i thought it doesnt work and shows the same error, so im thinking it is probably some other issue, maybe an issue with the gns3 version im using or something else.

0 Kudos
kb1
Collaborator

just upgraded gns3 to 2.2.5 which is the latest version and same issue still, looks like it wont work.

0 Kudos
kb1
Collaborator

got it to work with great difficulty, looks like iwas making some mistakes in the configuration, took hours of figuring out but it works now😵

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events