fw up_execute in R82

[AkosBakos]

Hi CheckMates,

I didn't know that, the fw up_execute command is more usable in R82. The numberof the limitations has been reduces. Therefore the command is more powerful now.

Akos

[Chris_Atkinson]

Indeed it gets only a brief mention in the What's NEW:

https://sc1.checkpoint.com/documents/R82/WebAdminGuides/EN/CP_R82_RN/Content/Topics-RN/Whats-New.htm...

[the_rock]

Will try it out in the lab and see what it looks like.

[the_rock]

Hey brother,

Just tested it in the lab, looks more less the same as before. This is R82 jumbo 60:

[Expert@CP-FW-01:0]# fw up_execute src=172.16.10.177 dst=8.8.8.8 ipp=0
Rulebase execution ended successfully.
Overall status:
----------------
Active clob mask: 4000002
Required clob mask: 0
Match status: MATCH
Match action: Accept

Per Layer:
------------
Layer name: network
Layer id: 0
Match status: MATCH
Match action: Accept
Matched rule: 6
Possible rules: 6 10 12 16777215

Layer name: appc+urlf
Layer id: 2
Match status: MATCH
Match action: Accept
Matched rule: 4
Possible rules: 4 16777215

Layer name: final-layer
Layer id: 1
Match status: MATCH
Match action: Accept
Matched rule: 1
Matched rules: 1