Will Policy based routing process the admin Traffic

[Kishorilal_CJ]

Hello

I have configured PBR towards management subnets through Management interface, where my remote authentication server and other administrative servers existed, apart from that I have default static route as well pointing to other interface.  when I try to authenticate the device using remote authentication protocols, it uses the static route rather PBR which is supposed to be preferable than static routes, here my question whether PBR  will process this kind of admin traffic originating from the device or something I configured improperly

[PhoneBoy]

It would be helpful to understand how you've configured it.

Screenshots or the like would be helpful.

[Kishorilal_CJ]

Hello

Please find the configuration for PBR

#################################################################

set pbr table Mgmttraffic static-route X.X.X.0/24 nexthop gateway address GWIP on
set pbr rule priority 1 match from Y.Y.Y.Y/32
set pbr rule priority 1 action table Mgmttraffic

################################################################

Where

X.X.X.0/24 - Managemt Subnet NW
Y.Y.Y.Y - Device Mgmt IP where traffic originates

[PhoneBoy]

Can you verify (with tcpdump) the traffic is originating from that IP?

[Kishorilal_CJ]

Yes, Its

[Kishorilal_CJ]

hostname was wrongly registered with old IP since its new device & configuration has been used from old device

[PhoneBoy]

So does that mean the problem is resolved or you are still having the issue?

[Kishorilal_CJ]

Yes It was resolved.. thanks for your time