Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Sharma_Prashant
Participant

Tunnel mode VPN and Transport mode VPN

Does Checkpoint support only Tunnel mode VPN only or we can use Transport mode as well for IPSEC...?

can we switch between them?

Any documentation can we  get it on this to get the clarity with example...?

0 Kudos
9 Replies
Timothy_Hall
Legend Legend
Legend

Pretty sure Check Point does not support Transport Mode (which is essentially AH only) and never has.  Transport Mode only provides the Integrity (SHA1/MD5/SHA256) and Authenticity (digital signatures) elements of the CIA model, while ESP adds in the Confidentiality piece (3DES/AES-XXX) along with the tunneling/encapsulation functionality.  All modern VPNs use ESP, but VPNs with Verizon corporate still call for the use of Transport Mode for some reason.

In the old days on other vendors it was possible to use just AH in transport mode without ESP.  This provided Integrity & Authenticity for the payload/data portion of an IP packet only with no encryption; the packet headers would be left intact and the entire packet would not be tunneled. This would save on encryption overhead when CPUs were much slower than they are today however good ol' Moore's Law has rendered this concern mostly moot.

Inevitably I would be asked for an example during a Check Point class about why in the heck you wouldn't want to encrypt the packet with ESP and achieve confidentiality; the best example I could come up with were real-time stock quotes. You sure as heck don't want someone to spoof them or tamper with them and as a result have your computer-based trading go awry, but you don't especially care if a man in the middle can see the quotes since they are more or less public information.  Read the Wikipedia article about Knight Capital for a graphic description of how a prominent high frequency trading firm was essentially bankrupted in the space of 45 minutes by automated trading errors.

--
My book "Max Power: Check Point Firewall Performance Optimization"
now available via http://maxpowerfirewalls.com.

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
Pawel_Topczewsk
Employee
Employee

Are You sure about it.

How would You explain situation when IPSec SA is set to NULL for IKE Phase 2?

Sincerely

PT

0 Kudos
Timothy_Hall
Legend Legend
Legend

Setting the Phase 2 Encryption to NULL does not cause Transport Mode to be used, it simply disables encryption of traffic traversing the VPN tunnel.  The entire original packet is still tunneled by ESP and digitally signed. 

Transport mode encrypts just the payload of the original packet and leaves the original packet header intact with no tunneling.

There are references to "Transport Mode" scattered throughout the Check Point VPN documentation, but they refer to supporting Transport Mode for Remote Access via L2TP and also GRE.  Transport Mode is not supported for site-to-site VPN.

--
My book "Max Power: Check Point Firewall Performance Optimization"
now available via http://maxpowerfirewalls.com.

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
Pawel_Topczewsk
Employee
Employee

Sorry Tim, I was thinking about enforcing AH only mode in Tunnel Mode. I was thinking this would disable ESP and leave only AH part of IPSec.

0 Kudos
Gomboragchaa
Advisor

@Tim Hall

I have a issue on transport Mode via GRE.  Toplogy is:

peer 1 ------- checkpoint ---- VPN ---- cisco ASA ----- peer2

Peer 1 and Peer 2 has GRE VPN connection. Checkpoint with ASA firewall connected NAT-T Site2Site vpn.

Both peer routers are connecting. But GRE tunnel doesn't work.

Is it possible to connect gre tunnel?

0 Kudos
Timothy_Hall
Legend Legend
Legend

Pretty sure GRE inside an IPSec tunnel is supported, although I can't recall ever setting one up.  Is the Check Point side a cluster?  If so could this be your issue: sk90060: GRE tunnel stops working inside a Site-to-Site VPN tunnel established with Check Point clus...

--
Second Edition of my "Max Power" Firewall Book
Now Available at http://www.maxpowerfirewalls.com

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
Gomboragchaa
Advisor

Thank you,

Checkpoint Side is cluster. Packets were coming in clear text and checkpoint dropping it.

We tried without VPN. Checkpoint has direct connected ASA and we created static route. Certainly, both peers are can connect each other. 

peer 1 ------- checkpoint ---- Direct Optic Link(without VPN) ---- cisco ASA ----- peer2

It hasn't dropp log, but still couldn't establish.

0 Kudos
Harshpal_Bhati
Employee
Employee

From sk104760 , i can see both are supported . IPsec can be implemented in a host-to-host transport mode, as well as in a network tunneling mode:
0 Kudos
Timothy_Hall
Legend Legend
Legend

I don't think this is the case, the part of the SK you are quoting is describing the theoretical elements of IPSec, not what can actually be configured.  There is no way to set an IPSec tunnel to use Transport mode that I can find, and Tunnel mode is the default.  I'd love to be proven wrong...

 

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events