Remote Access VPN using different Interfaces

[Di_Junior]

Hi Mates

 I need your help with regards to connecting to Check Point Remote Access VPN. We have a firewall with 3 interfaces (Public, Internal, DMZ). Since we use Internal VPN in order to connect to other parts of our network, we would like to be able to setup the VPN using the External internal (when we are outside the company), and the internal interface when we are in the company.

In the link selection there is only an option to select one IP, is there anyway we can configure the gateways to accept RA connection on both interfaces?

Thanks in advance

[PhoneBoy]

Believe you are limited to one IP for Link Selection, but if routing is set up correctly within the network, that should work.

[Di_Junior]

Hi PhoneBoy

Thanks for your feedback. I am sure  the routing is set up correctly, I will test and share the results.

Regards