Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
HeikoAnkenbrand
Champion Champion
Champion

R80.30 - Swiss Army Knive IPMITOOL for Sensor Infos

Ipmitool is a utility for managing and configuring devices that support the Intelligent Platform Management Interface.

IPMI is an open standard for monitoring, logging, recovery, inventory, and control of hardware that is implemented independent of the main CPU, BIOS, and OS. The service processor (or Baseboard Management Controller, BMC) is the brain behind platform management and its primary purpose is to handle the autonomous sensor monitoring and event logging features.

The ipmitool program provides a simple command-line interface to BMC. It features the ability to read the sensor data repository (SDR) and print sensor values, display the contents of the System Event Log (SEL), print Field Replaceable Unit (FRU) inventory information, read and set LAN configuration parameters, and perform remote chassis power control.

This "Swiss Army Knive" is also supported by Check Point GAIA.

Here are a few interesting examples:

# ipmitool sensor list

S1.PNG

# ipmitool fru                                                    -> power supply info

# ipmitool sdr elist full                                    -> electrical information (3.3V, 5V, 12V)
# ipmitool sdr type temperature                    -> temperature
# ipmitool sdr entity 29                                    -> fan speed

# ipmitool sdr type "Power Supply"               -> lost power on power supply xyz
s2.PNG

# ipmitool chassis status ipmitool chassis identify
s3.PNG

Be careful with these CLI commands:
# ipmitool [chassis] power soft           -> initiate a soft-shutdown via acpi
# ipmitool [chassis] power cycle         -> issue a hard power off, wait 1s, power on
# ipmitool [chassis] power off              -> issue a hard power off
# ipmitool [chassis] power reset         -> issue a hard reset



 
➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
2 Replies
James_Heueck
Participant

Does the remote control also work here?

0 Kudos
Ben_Losinger
Participant

Hello @James_Heueck 

I have tested it intensively during the last days. The Check Point IPMITOOL tool does not support remote access.

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events