Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
HeikoAnkenbrand
Champion Champion
Champion

R80.20 - new interesting commands

I've been testing R80.20 very intensively in the lab over the last few days. Here I have discovered some interesting new commands on CLI. What did you discover that didn't exist before?

# cphaprob stat     > with more clusterxl informations

# fwaccel ranges   > show's anti spoofing ranges

# fw ctl multik utilize   > shows the CoreXL queue utilization for each CoreXL FW instance

# fw ctl multik print_heavy_conn   > shows the table with heavy connections

 

More see:

Command Line Interface R80.20 Reference Guide 

 

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
41 Replies
Arild_Ollestad
Participant

Very good article, thanks

Achilles_Tagg
Participant

This is very informative. Thanks!

Luka_Walhalder
Participant

Great new commands.

Marco_Stanger
Explorer

Hello Heiko,

I use R80.20 and can not found this command:

# iotop -b -n 1

 

HeikoAnkenbrand
Champion Champion
Champion

Hi Marco,

It is only available on gateway with R80.20 3.10 kernel.

Regards

Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
James_Heueck
Participant

Yes it only work with kernel 3.10.

Jiangang_Yan
Explorer

got a little bit confusing about the answer as "only with 3.10 kernel". Is the release R80.20 with the fixed kernel rollout or the kernel could be changed from Administrator or could be different by different R80.20-Rollout Variation?  

0 Kudos
_Val_
Admin
Admin

iotop is Linux command, BTW. It is available for newer Linux distributions than 2.6 kernel based

Crischarles_D__
Explorer

Excellent commands  
Thanks for contribution. 

0 Kudos
HeikoAnkenbrand
Champion Champion
Champion

THX,

Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
0 Kudos
HeikoAnkenbrand
Champion Champion
Champion

At R80.20 there's a new hack to turn the CoreXL instances on the fly on and off. Here is an example with 3 FW wokers!

Now start the command:

# fw ctl multik stop     -> stop CoreXL instance 1

# fw ctl multik stop    -> stop CoreXL instance 2

# fw ctl multik stop   -> The last instance cannot be disabled:-)

 

You can activate it again per:

# fw ctl multik start

 

Conclusion:
CoreXL 0 cannot really be deactivated under R80.10+:-)

 

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
0 Kudos
HeikoAnkenbrand
Champion Champion
Champion

More see here:

ATRG: CoreXL 

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events