R77.30 Build-10 ISO image

[Prabulingam_N1]

Dear CheckMates,

I have Clusters in R77.30 Gaia 5000 appliance.

One member was not working and need to rebuild.

In working Member we have R77.30 Build Take-10 ISO image as below (few years back)

+++++++++++++++++++++++++++++++++++

Product version Check Point Gaia R77.30
OS build 10
OS kernel version 2.6.18-92cpx86_64
OS edition 64-bit

+++++++++++++++++++++++++++++++++++

Now I could not find this OS Build ISO image of R77.30.

Will building New member with Latest R77.30 ISO cause any issues?

(I will be installing JHF_Take_317 as well in both so that the 

(I had encountered some issues if ISO take is different in Cluster members eventhough JHF remains same)

Any suggestions will be helpful.

Regards, Prabulingam.N

[Maarten_Sjouw · Accepted solution]

There should be no problem when you do a clean install with the latest ISO and on top of that install 317. The only difference between the builds is that there is a Jumbo integrated already and the epoch date issues have been resolved.

[Prabulingam_N1]

Hello Maarten,

Thanks for your inputs, hope I should be using "Check_Point_R77.30_3000_5000_15000_23000_Sandblast_Appliances_T22.iso"

or

same Take_10 which I found "Check_Point_R77.30_3000_5000_15000_23000_Sandblast_Appliances_T10.iso".

Regards, Prabu

[HeikoAnkenbrand]

Why R77.30?

R77.30 is out of support in September.

[Prabulingam_N1]

Dear Heiko,

Since only 1 cluster member is Active currently, before something goes wrong I wanted to get other member back quickly.

Then customer will plan for R80.x later.

Thanks, Prabu