Question VPN client

[RemoteUser]

Is the standalone checkpoint VPN available for Linux?

[Tal_Paz-Fridman]

There are various clients for Linux depending on your needs:

https://support.checkpoint.com/results/sk/sk170198

Harmony Endpoint for Linux

https://support.checkpoint.com/results/sk/sk67820

Check Point Remote Access Solutions - Gateway-Based Access

[RemoteUser]

it's not for harmony endpoint, it's standalone
For remote access to autenicate on vpn

[G_W_Albrecht]

See Check Point Remote Access Solutions - Gateway-Based Access here:

https://support.checkpoint.com/results/sk/sk67820

[the_rock]

You just need basic client without any EDR capabilities?

[RemoteUser]

Yes, basic client for Remote access, as this:
png.png

But for linux 

[G_W_Albrecht · Accepted solution]

This is RA client for Layer-3 VPN Tunnel - for Linux, use strongSwan Client: https://sc1.checkpoint.com/documents/R81.20/WebAdminGuides/EN/CP_R81.20_RemoteAccessVPN_AdminGuide/C...

[the_rock]

See if below post helps.

Andy

https://community.checkpoint.com/t5/Security-Gateways/VPN-client-for-Linux/m-p/118830#M16828

[G_W_Albrecht]

This post is from 2021-2022, so better check the master page: https://support.checkpoint.com/results/sk/sk67820

You will find Mobile Access Web Portal, SNX and strongSwan for Linux. Harmony Endpoint for Linux has no VPN only EPS blades...

[the_rock]

Good point, I see that sk was updated less than 2 months ago.

[RemoteUser]

Thank you very much @G_W_Albrecht 

[the_rock]

Hey bro,

What @G_W_Albrecht sent is what you need to follow. I just tested it on Ubunto 22.04 version and worked fine.

Andy

[PhoneBoy · Accepted solution]

In terms of a Check Point-branded VPN client for Linux that can talk directly to a Quantum (Spark) Security Gateway, not today, though it is in the roadmap.
We do have a Linux-native client for our Harmony SASE offering: https://support.perimeter81.com/docs/linux-agent-release-notes