Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Wolfgang
Authority
Authority

Policy Based routing, NAT issue

Hello checkmates,

I had a problem with PBR (plicy based routing) and hide NAT.

We defined an automatic hide NAT on a network object with option hide behind gateway. Hide NAT works as expected,

Depending the routing configuration, IP-address from interface eth0 or eth1 is used as NAT address.

But if we use PBR for this network the IP-address of the interface regarding the default route is used as NAT address.

 

Does the option "hide behind gateway" uses the outgoing interface IP as NAT address or depends this NAT address  of the configured static-routes and the interface this route is directed?

Is there something different with PBR and hide behind gateway NAT?

 

Thanks

Wolfgang

0 Kudos
1 Reply
Timothy_Hall
Champion
Champion

Please see this recent thread:

https://community.checkpoint.com/t5/Enterprise-Appliances-and-Gaia/PBR-and-Hide-NAT/m-p/59969

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events