Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
abhinaw
Explorer

Modifying VLAN-ID on existing vsx cluster

Jump to solution

Hi ,

we have a existing running vsx cluster , we need to modify the existing vlan  say bond0.123 to vlan 321 like bond0.321 . How we can do this and what are the steps to be followed.

If its normal gateway firewall i understand we can delete the interface from cli and then reconfigure the new interface but in vsx what would be the steps.

Any guidance  is much appreciated.

 

Regards,

Abhi

0 Kudos
1 Solution

Accepted Solutions
_Val_
Admin
Admin

No, you will have to remove the old interface and add another one, with a different VLAN tag. That, however, can be done in one push.

Do not forget to push policy after making changes.

View solution in original post

3 Replies
_Val_
Admin
Admin

On VSX, you manage VS topology from the SmartConsole. All interfaces can be updated there directly. Look into the admin guide for details

0 Kudos
abhinaw
Explorer

Thank You Val !

So does it means we can directly modify the vlan tag (eg from bond0.123 to bond0.321 ) in the topology section from smart console and save it . 

No need to login to cluster firewall ?

0 Kudos
_Val_
Admin
Admin

No, you will have to remove the old interface and add another one, with a different VLAN tag. That, however, can be done in one push.

Do not forget to push policy after making changes.

View solution in original post