Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Dilian_Chernev
Collaborator

Is the NAT hitcount works in R81?

Hello ,

I have upgraded MGMT and GW from R80.40 to R81 few weeks ago and wanted to see if hitcount in NAT rules is working, but there are only '0'

Screenshot 2021-08-03 135041.png

Tried to disable/enable hitcount in General properties, but result is the same.

Is there some magic to be done to enable NAT hitcount ? (Access role hitcount is working properly)

Thanks

0 Kudos
4 Replies
Timothy_Hall
Champion
Champion

The hit counts are tracked on the gateway itself (they are not the result of log analysis on the SMS/Log Server) and the NAT hit counter function was added in version R81, so unless the gateway itself has been upgraded to R81+ as well I'm pretty sure those hit counts will always be zero.

"Max Capture: Know Your Packets" Video Series
now available at http://www.maxpowerfirewalls.com
0 Kudos
_Val_
Admin
Admin

My understanding is, the topic-starter's GW is already R81

0 Kudos
Dilian_Chernev
Collaborator

Yup, GW is R81 JHF29. Will try JHF 36 these days.

GW is upgraded, not clean install and I suppose some registry entrée or something should be set to true 🙂

0 Kudos
Paul_F
Contributor

We have this exact same problem.  Management server running R81.10 and gateways running the current recommeneded release of R81 with Jumbo HF Take 36.  The NAT hit counter worked for a few days, I thought this will be really useful feature, but then it stopped working and all NAT hit count values have been zero ever since, even after a right click and refresh.  Policy hit count rules are still working though.

0 Kudos