Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Narrah_Munthali
Participant

Internet access to different subnets

Hello Mates. I have configured different subnets on my checkpoint as per business requirement. these subnets are per function and we have 11 subnets. the problem is only nine subnets are working on the checkpoint even if I do the exact configuration on all subnets. Is there a limitation on subnets that can work on a checkpoint configuration? 

0 Kudos
3 Replies
PhoneBoy
Admin
Admin

We're going to need a lot more information.

At a minimum:

  1. What does the rulebase look like to permit access?
  2. Sample log entries from "working" and "not working" access?

Based on that, we should be able to provide guidance.

0 Kudos
Maarten_Sjouw
Champion
Champion

Some more questions:

  1. How do these networks connect to the Firewall?
  2. How did you define outbound NAT, all traffic behind GW or Hide NAT to an IP per subnet?
  3. How is routing setup for the 11 subnets?

We have customers with thousands of subnets connecting through a Check Point firewall so this number is not an issue.

Regards, Maarten
0 Kudos
Narrah_Munthali
Participant

1. There are two routers with /16 subnet. A microtik router receives all the traffic from the subnets and forwards them to the checkpoint. 

2. All subnets are hide Nat and its per subnet

3. Each subnet has a route pointing to the interface on the checkpoint that provides the internet. I will be uploading the network diagram shorlty 

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events