Hey everyoone,
Just to update on this, had zoom remote with @MaheshCheck and below are my notes. I feel good now if Cisco side resets the tunnel, it will work fine, but Mahesh will let us know for sure once they do it.
Andy
NOTES FROM THE CALL:
-zoom with Mahesh
-we enabled tunnel mgmt as per gateway since its combo of hosts/subnets
-installed policy
-first time config, never worked before
-Cisco mentioned phase 2 selectors are not matching
-peer ip x.x.x.x
below guidbedit settings should be set to FALSE to avoid any supernetting:
ike_enable_supernet
ike_p2_enable_supernet_from_R80.20
ike_use_largest_possible_subnets
peer -> xyz_gateway
we made sure guidbedit settings were set to false, changed last one -> ike_use_largest_possible_subnets
installed policy -> now tunnel shows UP
Mahesh will ask other side to check tomorrow and let us know
