Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Aman_Choubey1
Explorer

ISP Distribution

Hi Community,

I have one doubt actually, suppose i have Three ISP and i want to use all three ISP at a same time in my environment.

how can i do it.

please suggest.

thanks in advance. 

5 Replies
Vladimir
Champion
Champion

Please see this thread: https://community.checkpoint.com/thread/6273-isp-redundancy-with-3-isps 

If you actually have at least two /24 or larger ranges of public IPs from your ISPs, you can use BGP for limited load balancing on your perimeter routers and have Check Point configured for normal ISP redundancy.

0 Kudos
Houssameddine_1
Collaborator

In addition to what Vladimir said checkpoint supports only 2 ISPs for redundancy your best option  is to use dynamic routing. 

0 Kudos
Timothy_Hall
Legend Legend
Legend

Also keep in mind that using ISP Redundancy in Load Sharing mode will keep any traffic from being accelerated by SecureXL (i.e. 100% of traffic through the firewall will go F2F).

--
Second Edition of my "Max Power" Firewall Book
Now Available at http://www.maxpowerfirewalls.com

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
HristoGrigorov

Just to clarify that 100% of the traffic going out will be F2F. Internal traffic will still be accelerated.

0 Kudos
Jesus_Vladimir_
Participant

PBR is the best option, remember limitation is not probing, in case of  one link failure manually you have the change of the route. 

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events