Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Bharat_Sharma1
Explorer
Jump to solution

How to check telnet is enable or not.

Hi,

 

How to check telnet services is enable or not.

 

Please share cli command or Web GUI steps so I can check.

0 Kudos
1 Solution

Accepted Solutions
AHMADAHUSEN
Participant

Kindly enter the below command in clish mode,

> show configuration net-access

 

 

Then verify output which must be in below format to ensure about telnet is off, "set net-access telnet off"

 

This is basic hardening point of firewall.

View solution in original post

0 Kudos
6 Replies
PhoneBoy
Admin
Admin
Telnet is not enabled by default, nor is it recommended.
The clish command to check is show net-access.
You can check in WebUI under Network Access.
https://sc1.checkpoint.com/documents/R80.30/WebAdminGuides/EN/CP_R80.30_Gaia_AdminGuide/html_framese...
Bharat_Sharma1
Explorer

Hi,

 

Thanks for update, but the command your shared "net-access" is not work in clish & expert mode.

I have checked in WebUI I it's showing it's disabled. I have total 5 checkpoint firewall gateways & in two gateway (Open Server R77.30) WebUI I got the details, but other 3 gateway I am not able to check because "Network Access" option is not showing.

In this 3 gateway are appliance 2200 & R77.30 GAIA OS is installed, but when I logged in this gateway WebUI the login page is showing as R80.X. I have management open server R80.10.

0 Kudos
PhoneBoy
Admin
Admin

The command show net-access should work in R77.30 and later for sure, assuming it's Gaia OS.
Here's a screenshot of what it should show in the WebUI (from R77.30).

Screen Shot 2019-07-30 at 10.53.40 AM.png

Please post a screenshot of the relevant systems. 

0 Kudos
HeikoAnkenbrand
Champion Champion
Champion

Telnet is disabled by default. There is no telnetd rpm packet installed on GAIA.

Check the telnet port😀.

# netstat -an | grep 23

➜ CCSM Elite, CCME, CCTE
0 Kudos
HeikoAnkenbrand
Champion Champion
Champion

More about open ports can be found here:

R80.x Ports Used for Communication by Various Check Point Modules

➜ CCSM Elite, CCME, CCTE
0 Kudos
AHMADAHUSEN
Participant

Kindly enter the below command in clish mode,

> show configuration net-access

 

 

Then verify output which must be in below format to ensure about telnet is off, "set net-access telnet off"

 

This is basic hardening point of firewall.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events