Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Vengatesh_SR
Contributor
Jump to solution

Device got hang after R80.20 upgrade

Hi Guys,

We have recently upgraded our environment from R77.30 to R80.20 And it's a active standby setup. After the upgrade we are seeing both the gateway's (4800) frequently getting hanged and manual reboot getting the devices up.

Is the any limitation we need to upgrade our RAM in 4800 appliance for R80.20?

 

Regards,

Vengatesh SR

 

 

 

 

0 Kudos
1 Solution

Accepted Solutions
Timothy_Hall
Legend Legend
Legend

I don't think the 4800's ever shipped with less than 4GB of RAM, so it meets the minimum memory requirements for R80.20 and the 4800s are officially supported for R80.20 standalone.  If you suspect a memory issue, run cpview -t and look back at total memory allocation just prior to the hangs.

 

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com

View solution in original post

0 Kudos
1 Reply
Timothy_Hall
Legend Legend
Legend

I don't think the 4800's ever shipped with less than 4GB of RAM, so it meets the minimum memory requirements for R80.20 and the 4800s are officially supported for R80.20 standalone.  If you suspect a memory issue, run cpview -t and look back at total memory allocation just prior to the hangs.

 

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events