CoreXL SND

[GigaYang]

Dear All,

I have a few questions about CoreXL SND:
1. Assume that my firewall has two SNDs. When traffic reaches the firewall, how is it decided which SND should be processed? Is it also based on the load size of the two SNDs?
2. Does the working position of SND correspond to the 'little i'?
3. Is the load of SND Core generally smaller than that of Firewall Instance? If full load occurs, what are the possible reasons?
4. After R80, SND allocates work based on the load size of the Firewall Instance, so has the Global Dispatcher table been completely abandoned?

Thank you.

[Timothy_Hall]

Wow really?  What code release and HFA?

[the_rock]

[Expert@CP-GW:0]# cpinfo -y fw1

This is Check Point CPinfo Build 914000250 for GAIA
[FW1]
HOTFIX_TEX_ENGINE_R8120_AUTOUPDATE
HOTFIX_INEXT_NANO_EGG_AUTOUPDATE
HOTFIX_R81_20_JUMBO_HF_MAIN Take: 92
HOTFIX_R80_40_MAAS_TUNNEL_AUTOUPDATE
HOTFIX_PUBLIC_CLOUD_CA_BUNDLE_AUTOUPDATE
HOTFIX_GOT_TPCONF_AUTOUPDATE

FW1 build number:
This is Check Point's software version R81.20 - Build 043
kernel: R81.20 - Build 050

[Expert@CP-GW:0]#

[the_rock]

Btw, for the context, no matter what "flavor" I try, its the same thing.

Andy

[Expert@CP-GW:0]# dynamic_split -h
-h - Shows built-in help
-o enable - Enables the CoreXL Dynamic Balancing (requires a reboot)
-o disable - Disables the CoreXL Dynamic Balancing (requires a reboot)
-o stop - Stops the CoreXL Dynamic Balancing ("freezes" it; survives a reboot)
-o start - Starts the CoreXL Dynamic Balancing ("resumes" it; survives a reboot)
-p - Shows the current state of the CoreXL Dynamic Balancing
-r - Resets the CoreXL configuration to the default and keeps the CoreXL Dynamic Balancing enabled
-v <config> <value> - Set Dynamic Balancing configuration value (use "default" to change <config> back to default)
[Expert@CP-GW:0]# dynamic_split -o start
Dynamic Balancing is not running

[Expert@CP-GW:0]# dynamic_split -o enable
Dynamic Balancing is not supported on open server appliances
[Expert@CP-GW:0]#