Connection per second test

[yun_yuankang]

Perform performance tests using 15400 device，the Connection/ Second results were only half of those of the Detesheet,about 80-90K，how to allocate CPU to make the test result close to datesheet? At present, there are 2 SNDS, 14 Core FW, and the test version is R80.30

[PhoneBoy · Accepted solution]

In addition to more SNDs, you would probably need to enable multiqueue.
I don’t know the precise mix used for the data sheet test.

It would be far easier to upgrade to R80.40, enable dynamic workloads, and perform the test.
The gateway will adjust the SND/FWK mix on the fly.