Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Iron

Configure WAN interface outside the cluster.

Jump to solution

Hello. I am studying in a laboratory environment and I have a question. In the topology of the image I have a clusterXL already configured. My LAN interfaces are OK working with VIPs. My question is in the WAN connection (eth3) with my 2 ISPs. Is it possible to keep the eth3 interface connected with ISPs outside the cluster? In SMAR CONSOLE in the cluster properties I can't add the eth3 interface to stay out of the cluster.

 

 

 

Sem título.jpg

0 Kudos
1 Solution

Accepted Solutions
Highlighted

Re: Configure WAN interface outside the cluster.

Jump to solution

Of course you can, just mark it as private

Screenshot 2020-03-03 at 09.13.24.png

View solution in original post

3 Replies
Highlighted
Admin
Admin

Re: Configure WAN interface outside the cluster.

Jump to solution
This would be an unmonitored interface, which is possible.
See this thread: https://community.checkpoint.com/t5/Enterprise-Appliances-and-Gaia/ClusterXL-none-monitored-interfac...
Highlighted

Re: Configure WAN interface outside the cluster.

Jump to solution

Of course you can, just mark it as private

Screenshot 2020-03-03 at 09.13.24.png

View solution in original post

Highlighted
Iron

Re: Configure WAN interface outside the cluster.

Jump to solution

Hi Val. Thank you very much. I even selected the PRIVATE option, but I thought I had to enter the IP addresses on the 2 secure gateways. Thank you, as it is already working here.

 

123.jpg