cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post

Blocking source URL or hostname in Application Control&URL Filtering.

Jump to solution

HI.
We have some servers which will initiate connections from internet to our internal network. We use Inbound HTTPS Inspection to inspect this traffic. Is it possible to make only certain hosts from internet able to connect to internal network but not using IP address(because those hosts have dynamic IP)?

P.S. Using R77.30.

0 Kudos
1 Solution

Accepted Solutions
Admin
Admin

Re: Blocking source URL or hostname in Application Control&URL Filtering.

Jump to solution

This thread summarizes the options, which are:

  • Upgrade to R80.10 and use FQDN Domain Objects
  • Use Dynamic Objects plus a script to update its contents based on DNS names
0 Kudos
3 Replies
Admin
Admin

Re: Blocking source URL or hostname in Application Control&URL Filtering.

Jump to solution

Is it the source or destination IP that is dynamic here?

How would you determine whether the host is valid? DNS names?

Making the actual example more concrete would help.

0 Kudos

Re: Blocking source URL or hostname in Application Control&URL Filtering.

Jump to solution

HI. Source IP is dynamic and I guess, using DNS names is the only way to make it if it is possible at all.

0 Kudos
Admin
Admin

Re: Blocking source URL or hostname in Application Control&URL Filtering.

Jump to solution

This thread summarizes the options, which are:

  • Upgrade to R80.10 and use FQDN Domain Objects
  • Use Dynamic Objects plus a script to update its contents based on DNS names
0 Kudos