Azure Public Services Dynamic Object/HTTPS Inspection

[pinball]

Hello

Is it true the "Azure Public Serivces" object is no longer supported? This is the error we are getting in smart console and says enforing security on this is is not possible. We are currently troubleshooting issues with Azure/M365. What is the best practice for Azure/365 with regards to https inspection? Seems like if we set a bypass rule against this object everything works. If i enable https inspection for this object it breaks M365 services IE. cant login to OWA, outlook etc.. The services (M365) only work if we have a HTTPS bypass enabled for them. Are there any best practices with regards to Azure/Azure AD/M365 that we can follow? Anyone have some experience with this?

Thanks

[PhoneBoy · Accepted solution]

Try this first: https://support.checkpoint.com/results/sk/sk164772
If you're still seeing the issue, please consult with TAC: https://help.checkpoint.com 

[pinball]

This worked! No longer seeing this error.!

[the_rock]

I have good R81.20 lab going, so will test this tomorrow morning and update you.

Cheers,

Andy

[the_rock]

Since this was bugging me, I fired up my R81.20 lab and was able to create such rule in my appc/urlf layer, as you can see below.

Andy

Its R81.20 + jumbo 26

 

[pinball]

thanks - I will give this  a try.

[the_rock]

Glad @PhoneBoy solution worked, he is after all, CP TRUE EXPERT 🙌🙌

By the way, since I tested this in R81.20, I can tell you, having had this lab since the beginning of R81.20, November 2022, its super stable and Im very impressed with it, so I strongly urge everyone now to upgrade, specially considering it is CP recommended version.

Cheers,

Andy