Are Management Data plane feature supported to 5000 series appliance with R80.30

[soni_kumari1]

Can we enable the Management Data plane on 5900 appliances?

As per the sk138672 below is the minimum requirement for r80.30

============================
Minimum Requirements
This feature must be enabled with the following:
For R80.30 kernel 3.10, Jumbo Hotfix Take 136 or higher must be installed.
============================

And as per the release notes of kernel 3.10 Gaia R80.30 and sk152652, it says 3.10 Gaia doesn't support 5000 series.

[PhoneBoy]

It's saying: if you use the R80.30-3.10, you must have JHF 136 or above.
If you use R80.30 (which is based on 2.6.18), it should work fine provided the relevant platform has 8 or more cores.

[Timothy_Hall]

Originally 8 cores were required, but it will now work with as little as 4.  See this:

https://community.checkpoint.com/t5/Enterprise-Appliances-and-Gaia/New-R80-30-feature-Management-Dat...

Edit: 5600, 5800, and 5900 all have at least 4 cores so this feature should work on them.

[soni_kumari1]

Thank you guys for reply.

As per the above update, this feature doesn't depend on Gaia os kernel?

[Timothy_Hall]

No this feature is available in R80.30+ on both the 2.6.18 and 3.10 kernel, although if you have the 3.10 kernel you must have at least R80.30 Jumbo HFA take 194+ installed.