mgmt ports and main Cluster VIP

[#1]

Dear all ,

i have two appliances 3970 and i have them physically connected to vlan200 with their addresses so call it MGMT vlan200 ,my SMS machine is also in the same vlan but as a VM  on hyperv SET switch with vlan200 so they can  se each other and i can configure them etc.

So my question is if i create a cluster what should be my main cluster IP should i put ip adress from mgmt vlan or to put some of data vlans .

like i have bond that trunks all internal and mgmt  vlans from the switch  to a active/backup bond at checkpoint gateways.

so i have like bond1.10 20 40 50 60 200 vlan interfaces on that bond.every vlan interface is  10.vlannumber.0. 253 252 with vip 254

what will be if i have mgmt addreses for gateways and main cluster vip in like 10.10.0.254 .

it looks like in attach

thanks

[#2]

Dear all ,

i have two appliances 3970 and i have them physically connected to vlan200 with their addresses so call it MGMT vlan200 ,my SMS machine is also in the same vlan but as a VM  on hyperv SET switch with vlan200 so they can  se each other and i can configure them etc.

So my question is if i create a cluster what should be my main cluster IP should i put ip adress from mgmt vlan or to put some of data vlans .

like i have bond that trunks all internal and mgmt  vlans from the switch  to a active/backup bond at checkpoint gateways.

so i have like bond1.10 20 40 50 60 200 vlan interfaces on that bond.every vlan interface is  10.vlannumber.0. 253 252 with vip 254

what will be if i have mgmt addreses for gateways and main cluster vip in like 10.10.0.254 .

it looks like in attach

thanks

[#3]

Dear all ,

i have two appliances 3970 and i have them physically connected to vlan200 with their addresses so call it MGMT vlan200 ,my SMS machine is also in the same vlan but as a VM  on hyperv SET switch with vlan200 so they can  se each other and i can configure them etc.

So my question is if i create a cluster what should be my main cluster IP should i put ip adress from mgmt vlan or to put some of data vlans .

like i have bond that trunks all internal and mgmt  vlans from the switch  to a active/backup bond at checkpoint gateways.

so i have like bond1.10 20 40 50 60 200 vlan interfaces on that bond.every vlan interface is  10.vlannumber.0. 253 252 with vip 254

what will be if i have mgmt addreses for gateways and main cluster vip in like 10.10.0.254 .

it looks like in attach

thanks

[Chris_Atkinson]

Having MGMT as a non cluster interface has its benefits.

[Chris_Atkinson]

Having MGMT as a non cluster interface has its benefits.

[the_rock]

Hey brother,

So sorry I forgot to respond to you yesterday via direct message, but I assume its related to discussion we had? If so, what Vince said makes sense.

[the_rock]

Hey brother,

So sorry I forgot to respond to you yesterday via direct message, but I assume its related to discussion we had? If so, what Vince said makes sense.