R82.10 on Proxmox

[Moudar]

Hi all,
I am testing the installation of a Check Point SMS on Proxmox. However, every time the First Time Wizard reaches 90%, it fails, as shown in the attached screenshot.

Any idea what that would be for error? maybe it is Linux error ?
disk is 200GB
8 CPU 
12GB memory

[Lesley]

did you picked the correct image? https://support.checkpoint.com/results/sk/sk158292

[Moudar]

I am using this one:

[Lesley]

ISO looks good, can you check this sk?

https://support.checkpoint.com/results/sk/sk115613

[Moudar]

R82.10 is not on that link but i wiil try it and get back

[Moudar]

 ls -la /etc/.wizard_accepted
-rw-r--r-- 1 admin config 0 May 16 15:34 /etc/.wizard_accepted
[Expert@A-SMS:0]# tail -n 10 /var/log/ftw_install.log
psql: error: connection to server on socket "/tmp/.s.PGSQL.5432" failed: FATAL:  password authentication failed for user "postgres"
psql: error: connection to server on socket "/tmp/.s.PGSQL.5432" failed: FATAL:  password authentication failed for user "postgres"
psql: error: connection to server on socket "/tmp/.s.PGSQL.5432" failed: FATAL:  password authentication failed for user "postgres"
psql: error: connection to server on socket "/tmp/.s.PGSQL.5432" failed: FATAL:  password authentication failed for user "postgres"
psql: error: connection to server on socket "/tmp/.s.PGSQL.5432" failed: FATAL:  password authentication failed for user "postgres"
psql: error: connection to server on socket "/tmp/.s.PGSQL.5432" failed: FATAL:  password authentication failed for user "postgres"
Cannot install Check Point Security Management Server. Please contact Check Point Technical Support.
Disabling LLDP on all interfaces. originally activated to detected MHOs existence
Not SP, Disabling temporary configuration for SP detection
05/16/26 15:34:06 FTW: Complete

[Lesley]

To make sure, if you start all over with fresh machine, same issue right? The error atleast gives some info but this is a user that is created by Check Point and not you, so not that much you can do wrong. Are you able to install a gateway only system?

I think you have to ask TAC to help

[Moudar]

I haven't tested that specific gateway yet, but I did test R82 and it works fine. This leads me to suspect a Linux 5.x kernel issue—or perhaps just a need for new Proxmox tweaks that weren't required back on the older Linux 3.x kernels.

[Lesley]

Big difference between r82 and r82.10 for this scenario.